Fire Protection Engineers
Commercial buildings need to be inspected annually to comply with municipal safety codes and regulations, energy use and other standards. Fire protection engineers are assigned the task of inspecting a property indoors and outdoors to identify any potential hazards that might lead to flames breaking out and partial or complete burning.
The materials used to build a building must be thoroughly analyzed by fire-protection engineers. The type of insulation used in the walls and floors, for example, might play a major role in creating a fire hazard. Traditional isolation of fibreglass and wool can be easily set to fire. Therefore some kind of fireproof materials must be used to reduce the chance of rapid spread of flames through the rooms. It is possible to use gypsum panels to replace fiberboards that normally cover insulation.Visit Sinisi Solutions for more details.
Installing a firewall also constitutes an essential component of building security. In a commercial facility, concrete and cement should be laid out in between several load-bearing walls. It may take hours for flames to penetrate such barriers and ignite a fire in rooms surrounding it.
Fire protection technicians are also analyzing a building’s alarm system. See and audible warnings should be produced, for example, to warn all occupants of a fire outbreak. Smoke detectors and carbon monoxide sensors must be strategically mounted and connected to an electrical wiring network at each point. Long lasting batteries also have to provide backup power. Traditional bells made of metal can still be used as effective fire alarms. In addition, digital systems include flash strobes which light up when the fire alarm is activated.
A fire-protection engineer must approve a building’s extinguishing system. In sprinkler systems the entire layout of water supply lines is usually inspected and tested several times a year. An extinguishing system for minimizing oxygen is much more complex than a traditional plumbing device that sprays only water on flames. Pumps are used to remove oxygen from a room to prevent the naturally occurring reaction called combustion.
Fire protection engineers could also inspect the building’s rooftops to determine if their structures are at risk of rapid collapse once the levels below are engulfed by flames. In addition, fireproof shingles should be used to cover pitched roof structures, instead of dark black tar.